Yes, AGON AG275UXM supports VESA installation. The monitor uses a standard 100x100mm VESA hole position, which can be adapted to most third-party VESA arms or wall brackets, and requires the installation to use appropriate M4 screws and be careful to avoid damage to the internal structure. When selecting VESA arms, you should pay attention to load-bearing capacity (approximately 3.8kg), compatibility, adjustment range and cable management functions. It is recommended to fix the arm first and then connect the monitor, use anti-slip gaskets to protect the back, and make sure the screws are tight. The overall installation process is simple, just pay attention to matching the hole position and load bearing to install smoothly.

Yes, the AGON AG275UXM supports VESA installation and can be hung on a compatible VESA arm. This monitor uses a standard 100x100mm VESA mounting hole, which means you can mount it on most third-party VESA arms or brackets without using the original base.

Monitor back interface and mounting hole position

The back of the AGON AG275UXM is designed with four screw holes for installation, arranged in a square of 100x100mm, complies with the universal VESA standard. You can easily find a suitable VESA arm or wall mount. Usually these holes are blocked by a plastic cover and can be seen after removing the cover.

It should be noted that when installing, you must make sure that the screws used are of the right size (usually M4 screws). Excessively long screws may damage the internal structure of the monitor.

How to choose the right VESA arm

There are several key points to pay attention to when choosing an arm:

• Load-bearing capacity : Ensure that the VESA arm can support the weight of this monitor (approximately 3.8kg without base)
• Compatibility : Supports 100x100mm hole position
• Adjustment range : If you want to achieve lift, rotate or multi-angle adjustment, you can choose a multi-joint style
• Cable management : Some arms have wire ducts that can improve the cleanliness of the desktop

It is recommended to choose brand products with reliable quality, such as Uplift, Humanscale or some cost-effective domestic brands, such as Lege and Green Forest.

Installation precautions

The installation process is actually not complicated, but there are several details that are easily overlooked:

• Fix the VESA arm first and then connect the monitor to avoid screwing the screws while holding the monitor
• Use anti-slip gaskets or tape to protect the back of the monitor from scratches
• Make sure all screws are tight, especially the part between the connecting arm and the monitor
• If your VESA arm needs to be installed through a wall or a table clip, remember to check whether the wall or desktop material is suitable for you

Some users reported that the VESA installation steps were not discussed in detail in the original factory manual. In fact, just align the hole position and fix it with appropriate screws, and it doesn’t have to be too complicated.

Basically that's it. As long as you pay attention to matching hole position and load bearing, it is absolutely fine to hang the VESA arm of the AGON AG275UXM.

The above is the detailed content of Can the AGON AG275UXM be mounted on a VESA arm?. For more information, please follow other related articles on the PHP Chinese website!