Windows 可以通過多種方法解決“Getting ready”界面卡頓問題而無需重裝系統。首先，應等待一小時以上，因系統配置可能仍在后臺運行；若兩小時后仍無進展，則嘗試強制重啟以觸發內置修復工具；接著，可進入安全模式卸載最近更新，依次移除可能導致沖突的驅動或系統更新；此外，使用DISM和SFC命令檢查并修復系統文件亦為有效手段；最后，拔掉非必要外設如打印機、USB設備等，以防干擾更新流程。多數情況下，上述步驟能解決問題，若仍無法解決，再考慮重置或重裝系統。

Windows getting stuck on the "Getting ready" screen is a common issue after an update or a fresh install. It usually happens when system files are being configured, but sometimes it gets stuck for various reasons like corrupted updates, incompatible drivers, or hardware issues.

Here’s how you can try to fix it without losing your data or going through a full reinstall.

1. Wait a Bit Longer (Seriously)

Before jumping into fixes, give it some time — up to an hour or more. The "Getting ready" step often takes longer than expected, especially during major updates like a feature upgrade.

• Windows may appear frozen, but background processes could still be running.
• If you see a progress bar or spinning icon, even if it's slow, it's best to wait it out.

If there's absolutely no activity and it's been over 2 hours, then it's safe to assume something went wrong and proceed with other steps.

2. Force Restart and Let Windows Try to Recover

Sometimes forcing a restart can trigger Windows' built-in recovery tools.

• Press and hold the power button until the PC shuts down.
• Wait about 30 seconds, then turn it back on.
• Repeat this once or twice — Windows might detect a problem and boot into recovery mode.

When that happens:

• You may see options like Troubleshoot or Startup Repair
• Choose those to let Windows attempt automatic repairs

This works in many cases because Windows marks the last known good state and rolls back part of the update process.

3. Boot Into Safe Mode and Uninstall Recent Updates

If you can access Safe Mode, you might be able to roll back recent changes that caused the freeze.

To get into Safe Mode:

• On the login screen, click the Power icon and press Shift while clicking Restart
• Go to Troubleshoot > Advanced Options > Startup Settings > Restart
• Press F4 or 5 to enable Safe Mode

Once in Safe Mode:

• Open Control Panel > Programs > Uninstall a program > View installed updates
• Find any recent updates related to Windows or drivers
• Uninstall them one by one, restarting after each removal

Some users have reported success removing optional driver updates or .NET Framework updates that caused conflicts during setup.

4. Use System File Checker and DISM Tools

Corrupted system files can also prevent Windows from finishing the setup process.

If you can get into Recovery Environment (WinRE):

• Select Troubleshoot > Advanced Options > Command Prompt
• Run these commands:

DISM /Online /Cleanup-Image /CheckHealth  
DISM /Online /Cleanup-Image /ScanHealth  
DISM /Online /Cleanup-Image /RestoreHealth  
sfc /scannow /offbootdir=C:\ /offwindir=C:\Windows

These commands check for file corruption and try to repair it using Windows’ built-in tools.

Note: This requires internet access in WinRE or a working Windows image.

5. Disconnect Non-Essential Hardware

External devices like printers, USB drives, or even certain peripherals can interfere with the update process.

Try unplugging everything except:

• Keyboard
• Mouse
• Monitor

Leave storage devices like external SSDs or flash drives disconnected too, unless they're part of the issue (e.g., booting from one).

Some people found that disconnecting third-party webcams or audio devices helped resolve the stuck screen.

Fixing this issue usually involves patience and a few trial-and-error steps. Most of the time, Windows will recover on its own or with minimal intervention. If none of these work, you might need to consider resetting or reinstalling Windows as a last resort.

But before that, give it a couple of forced reboots — sometimes that’s all it needs.

以上是如何修復窗戶被卡在準備就緒屏幕上的詳細內容。更多信息請關注PHP中文網其他相關文章！