Xbox Series X controller cannot be connected? don’t worry! This article provides solutions, which also apply to other types of controller connection problems, such as Xbox Series S controller connection failure.

Xbox Series S controller connection failed

For many players, the Xbox Series S is the most cost-effective next-generation console choice. However, it is frustrating that sometimes the newly-applied Xbox Series S controller doesn't connect.

While connection problems are common in various handles, finding a solution is crucial. In most cases, pairing failures are temporary, caused by glitches or connection delays. If the problem persists, continue reading the following steps.

Related articles:

• Xbox Series X vs Series S: Difference comparison and best choice
• Xbox One X|S vs Xbox Series X|S: Difference Comparison

Solve Xbox Series S controller connection failed

Method 1: Check the battery level of the handle

First, check the handle battery level. Make sure the battery is sufficient. The battery level is usually displayed on the top of the home screen, and you can also try to replace the battery.

Method 2: Re-pair the handle

If the handle cannot be connected, make sure that the handle is paired with the Xbox Series S. If paired, try repairing.

Step 1: Open the console and press the Xbox button to open the handle.

Step 2: Press the "Pair" button on the right side of the host.

Step 3: Then long press the Pair button on the top of the handle close to the USB port for about 20 seconds.

During this process, the Xbox button will flash and the Xbox button will remain lit after successful pairing.

Method 3: Restart the host

Try restarting the host to fix system failures. Before operation, please remove items that may interfere with signals between the handle and the host, such as microwave ovens.

Press and hold the Xbox button on the front of the console for ten seconds to turn off the machine, and then restart after completely shutting down.

Method 4: Use data cable to connect

Use a USB-C data cable to connect the handle and the host. If this method works, you need to update the handle firmware; if it doesn't work, you may need to change the handle. The specific steps are as follows:

Step 1: Connect the handle and host using a USB-C cable, and press the Xbox button to open the guide.

Step 2: Select Settings under "Profile and System", and then select Accessories under "Device and Connections".

Step 3: Enter the Xbox wireless controller interface and select “…” to check the firmware version.

Then follow the on-screen instructions to complete the update. After the update is completed, you can disconnect the data cable and try to connect wirelessly.

Summarize:

This article provides a variety of ways to solve Xbox Series S controller connection failures. Usually, the problem can be solved after trying these methods. If the problem persists, please contact official support.

The above is the detailed content of A Full Guide to Fixing 'Xbox Series S Controller Not Connecting” - MiniTool. For more information, please follow other related articles on the PHP Chinese website!