Is it blue screen after cloning SSD and cannot start Windows normally? Don't worry, this is a common problem, usually caused by a boot error or disk issue. This article will share several possible solutions to solve this problem.

• How to fix cloned SSD on blue screen on Windows
• Summarize

Problem - Blue screen after cloning SSD

Cloning an SSD is a common way to upgrade a hard drive without reinstalling Windows, reinstalling applications, or losing data. However, things don't always go smoothly. Many users report that they encounter blue screens after cloning the SSD, such as error code 0xc000000e.

This problem usually means that Windows cannot find the necessary startup configuration file. This may be caused by incorrect boot mode, missing or mismatched disk drivers, BCD corruption, etc. If your computer fails to boot after successfully cloning the SSD, here are some effective fixes that can help you solve this problem.

hint:

MiniTool ShadowMaker is a professional tool for data backup and disk cloning. You can use it as a preferred solution or a reliable alternative to easily create a complete system image or file backup.

How to fix cloned SSD on blue screen on Windows

Method 1: Change the startup mode to UEFI

A common reason for blue screens after cloning an SSD is that the system boot mode does not match the partition style of the cloned disk. If the SSD uses GPT partition style, but the BIOS is set to boot in Legacy mode, the Windows system will not load correctly. Switching startup mode to UEFI can resolve this compatibility issue. You can see how to do it.

Step 1. Start the computer and press the manufacturer's button to enter the BIOS. Commonly used keys include Esc , Delete , F2 or F12 .

Step 2. Navigate to the Startup tab and select UEFI/BIOS boot mode .

Step 3. Select UEFI and save the changes.

After that, you can set the new SSD as the boot drive: find the boot order option and use the up and down arrow keys to move the SSD to the top of the boot order. Next, save the changes and exit the BIOS. Finally, restart the computer and check if the computer is booting normally.

Method 2: Update the disk driver

Outdated or incompatible disk drivers may also trigger blue screens after cloning SSDs. Updating the disk driver ensures correct communication between the system and the new drive. Please follow the steps below.

If you are able to boot Windows from an old disk, you can skip to step 3 and open Device Manager directly.

Step 1. Press and hold the power button on the computer for 10 seconds to turn off the computer and turn it on. When you see the computer manufacturer's logo, press and hold the power button again for about 10 seconds to turn off the device. Repeat this process 3 times until you see the Auto Repair window.

Step 2. Check Advanced Options > Troubleshooting > Advanced Options > Start Settings > Restart . Next, press 5 to enter the secure mode with network.

Step 3. Right-click the Start button on the taskbar and select Device Manager .

Step 4. Expand the disk drive , right-click on the SSD, and select Update Driver .

If this does not work, select Uninstall the device to remove the mismatched drivers. After that, restart the computer and the correct driver should be installed automatically.

Method 3: Run CHKDSK

If the disk cloning process is interrupted or the target disk has bad sectors, it can cause file system corruption, resulting in blue screen problems. In this case, you can run the CHKDSK utility to scan and fix disk errors.

First, open the command prompt as an administrator.

Secondly, type chkdsk disk letter: /f /r and press Enter to check and fix file system problems. Note that you need to replace the disk letter part with the actual disk letter of your SSD.

Method 4: Reconstruct BCD

If the blue screen is caused by the lack of startup configuration data, rebuilding BCD is the target solution as it can restore important startup information and help your system boot properly from the cloned SSD.

Go to WinRE and select Troubleshoot > Advanced Options > Command Prompt .

Type bootrec /rebuildbcd and press Enter to rebuild BCD. Finally, you can restart the device and check if the system can successfully boot from a new SSD without problems.

learn more:

I would like to introduce a powerful Windows user data recovery tool - MiniTool Power Data Recovery. After years of continuous development, it is good at recovering lost or deleted files from HDD, SSD, USB drive, SD card, etc. If you need to recover files, it is definitely one of the top choices worth considering.

Summarize

If you encounter a blue screen after cloning the SSD, try changing the boot mode to UEFI, updating the disk driver, running CHKDSK, or rebuilding the boot configuration file. If none of these methods work, you might consider performing a fresh Windows installation, then reinstalling your application and transferring your files.

The above is the detailed content of Trusted Guide to Fixing PC Blue Screen After Cloning SSD. For more information, please follow other related articles on the PHP Chinese website!