Recovery Mode is commonly used for troubleshooting a Mac, reinstalling system software, erasing disks, and performing related tasks. You might have used recovery mode previously to resolve an issue, or possibly even entered it accidentally on your Mac. In rare cases, a Mac may continuously boot directly into Recovery Mode. Regardless of how you got there, you might be wondering how to exit recovery mode on your Mac.

The good news is that exiting recovery mode on a Mac is very straightforward.

Exiting Mac Recovery Mode by Restarting the Mac

All you need to do is restart the Mac in order to leave recovery mode.

You can restart from the ? Apple menu by selecting “Restart”, or by pressing and holding the Power button until the Mac turns off, then turning it back on.

Regardless of the type of Mac you have, restarting will take you out of recovery mode.

This process differs from entering recovery mode, which depends on the chip architecture of the Mac—either pressing the power button for M1 Macs or using a specific key combination for Intel Macs.

When it comes to exiting recovery mode, it doesn’t matter what hardware or system software version you are using—it works across all Mac models and macOS versions. Just restart your Mac and allow it to boot up normally. It really is that simple.

Problem: My Mac keeps booting into recovery mode automatically!

In some uncommon situations, a Mac might start booting directly into recovery mode on its own. Even after restarting, the Mac continues to boot into recovery mode. There could be several reasons behind this behavior.

Automatic entry into recovery mode may occur if the startup disk is not detected, the disk has failed, or no valid system software is available.

If the startup disk isn't found, go to the ? Apple menu, select “Startup Disk”, and choose your boot volume—typically named Macintosh HD or something similar.

If the system software is missing, you’ll need to reinstall macOS. The process varies slightly depending on whether you're using an M1 Mac or an Intel-based Mac.

If the drive itself has failed, your Mac may require professional servicing or a disk replacement (though many modern Macs have the SSD soldered to the motherboard, making replacements difficult).

Additionally, incorrect NVRAM settings on Intel Macs can cause this issue. Resetting the NVRAM often resolves the problem immediately.

The above is the detailed content of How to Exit Recovery Mode on Mac. For more information, please follow other related articles on the PHP Chinese website!