The native resolution of AG275UXM is 3840x2160 pixels, i.e. 4KUHD. Use this resolution to ensure the clearest picture and richest details. For best results, set the monitor to "native" or "recommended" resolution, ensure the graphics card supports 4K output, and use a high-speed HDMI2.1 or DisplayPort1.4 cable. Since the 4K on the 27-inch screen may cause the interface to be too small, it is recommended to adjust the Windows zoom to 150% or 200%. Some applications and games can also adjust the zoom separately. For gaming performance, 4K has high requirements for GPU. It is recommended to use DLSS or FSR technology to increase the frame rate, or appropriately reduce the image quality settings to balance the frame rate and visual effects. In short, ensuring systemicity

The contrast of the AG275UXM monitor is not explicitly listed in the official specifications, but its DisplayHDR600 certification and local dimming technology provide good contrast performance. 1. It has not announced the static contrast value; 2. It supports DisplayHDR600, which means at least 600 nits of peak brightness; 3. Use a local dimming backlight system to improve effective contrast; 4. The native contrast is about 1000:1 to 1300:1, which is a common range of IPS panels; 5. The contrast is significantly improved after local dimming is enabled; 6. Although it does not reach the OLED level, the visual effect is excellent enough for most users, especially gamers.

AOCAG275UXMgamingmonitorofferscrosshairassistandBlackEqualizertoenhancegameplay.1.Crosshairassistprovidesacustomizableon-screenaimingpoint,especiallyusefulinFPSgamesduringmovementorrecoil,adjustableviaOSDmenuwithoutaffectinggamemechanics.2.BlackEqual

TheAG275UXMgamingmonitoroffersmultiplemodernportsforversatileconnectivity.1)HDMI2.1supports4Kat120Hz,VRR,andALLMforconsolesandhybriduse.2)DisplayPort1.4deliversoptimalPCperformancewithWQHDatupto360Hz,DSC,andAdaptive-Sync.3)Abuilt-inUSBhubprovidesconv

The input delay of AG275UXM is excellent and suitable for gaming and daily use; 1. In "Game Mode", the input delay is usually 4ms to 6ms; 2. It is recommended to enable game mode to reduce latency; 3. Use DisplayPort to connect to get better response speed; 4. Turn off post-processing functions such as dynamic blur or HDR enhancement to help reduce latency; 5. Enable low-latency modes such as NVIDIAReflex or AMDAnti-Lag in GPU settings further optimize response time; 6. Enable G-Sync or FreeSync has little impact on input delay and can prevent screen tearing; To sum up, AG275UXM provides excellent response performance under correct settings.

TheAG275UXMusesanIPSpanel,whichoffersexcellentcoloraccuracy,wideviewingangles,andconsistentbrightness.1.Itdeliversvibrantcolorsandbetteroff-axisimagequalitycomparedtoTNpanels.2.Itprovideswiderviewingangles,typicallyaround178°,ensuringgoodpicturequali

The AG275UXM does have a USB-C port that supports power delivery (PD), with a maximum power output of 90W, which can be used for charging, data transmission and display input. 1. The USB-C interface supports up to 90W of power transmission, which can effectively charge most modern laptops, including MacBook Air and some Windows ultrabooks; 2. When using it, you need to use a full-featured USB-C cable and confirm that the device supports PD protocol; 3. It is recommended to connect the monitor first and then turn on the power to ensure synchronous identification of the power and signal; 4. Centralized power supply and use can be achieved by connecting the peripheral device to the USB downlink port of the monitor; 5. There are certain restrictions. If non-PD devices cannot obtain power, third-party cables may cause charging.

Yes,theAGONAG275UXMincludeseye-caretechnologiestoreduceeyestrain.1.ItfeaturesFlicker-Freetechnologythatminimizesscreenflickeringacrossallbrightnesslevels,enhancingcomfortduringlonguse.2.TheTüV-certifiedLowBlueLightmodereducesharmfulbluelightwithprese