When encountering the error of the Windows stop code "memory management", 1. First check whether the memory stick is aging, poor contact or compatibility, try to plug and unplug and clean the gold finger, and use the Windows memory diagnostic tool to detect it; 2. Check whether there is any conflict in the driver, update or roll back the graphics card and motherboard driver, and uninstall third-party software that may interfere with the system; 3. Run the sfc and DISM commands to repair the system files, and check the health of the hard disk through CrystalDiskInfo or chkdsk; 4. Adjust the BIOS settings, restore the default configuration, turn off the overclocking, and update the BIOS version to ensure that the memory management is running stably.

Encountering the "memory management" error in the Windows stop code usually means that there are serious problems in the system during memory management, resulting in a blue screen of death. This problem may be caused by corruption of hardware, drivers or system files, and it needs to be investigated from multiple perspectives if solved.

1. Memory failure is a common cause

The most direct cause is that there is something wrong with physical memory (RAM). Whether it is memory aging, poor contact, or compatibility issues, it may cause the system to fail to manage memory normally.

• Try plugging and unplugging memory sticks and clean up the gold finger part
• If there are multiple memory sticks, try testing one by one
• Check using the Windows Memory Diagnostic tool (Windows Memory Diagnostic)

You can run this tool by entering "Windows Memory Diagnostics" in the search bar, which will automatically restart and detect memory problems.

2. Driver conflicts may also raise this error

Some drivers, especially those related to graphics cards and motherboards, will also cause memory access exceptions if the version is incorrect or incompatible with the system.

• Update all drivers, especially motherboard chipset and graphics card drivers
• Roll back the recently updated driver to see if it returns to stability
• Disable or uninstall third-party antivirus software and virtualization-related software

If you have just installed new hardware or updated drivers recently, this is even more likely.

3. System file is corrupted or updated failed

The system core files are corrupted, updated and interrupted, or the disk has bad channels, which will also affect the normal operation of the memory management module.

• Run sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth to repair system files
• Check the health status of the hard disk, use CrystalDiskInfo or the chkdsk tool that comes with the system

If there is a problem with the SSD, sometimes there will be unpredictable crashes. Replacing the hard drive may be a more thorough solution.

4. Improper BIOS settings or system settings

Some advanced memory settings in the BIOS (such as the XMP overclocking configuration) may also cause memory management errors if not enabled correctly.

• Try to restore the default settings to the BIOS
• Turn off the overclocking option to see if there will be any problems
• Update BIOS to the latest version

If you are not an overclocker, it is recommended to keep the default settings to avoid unnecessary hassle.

Overall, the Windows stop code memory management error, although it looks scary, can be found in most cases by checking memory, drivers, and system files. Basically, it’s about these investigation directions. Don’t rush to reinstall the system. Start with the basics step by step.

The above is the detailed content of Windows stop code memory management. For more information, please follow other related articles on the PHP Chinese website!